pionata
April 11th, 2005, 02:22 am
Wizards’ Islands - Scourge of the Frost Bringer
Presented By Wizards’ Alliance
Hi everyone, I wanted the RPG gamers to know that after 3 years we finaly completed our morrowind expansion pack.
The 611 meg exe archive is located on our website :
http://www.wizards-islands.com
Release Information :
Table of contents
1.Features
2.Release and Installation Information
3.System Requirements
4.Known Gameplay Issues
5.Specific Performance Issues
6.Unique Gameplay Features
7.Team and Credits
__________________________________________________
1. Features
Intense and Epic Multiple-Paths Storyline between 20 and 30 hours.
Over 400 "Cell" Areas.
Over 3 Hours of music.
Tons of characters.
New creatures, items, spells (only for a boss creature atm.) weapons & armors.
And... more cool stuff.
__________________________________________________
2. Release and Installation Information For Version 1.0
Wizards’ Alliance is proud to release Wizards’ Islands, Scourge of the Frost Bringer. Almost 3 years of effort was necessary to achieve our plans, and it turned out very much as we had expected. While all quests are completed and fully implemented, we did leave some room for Wizards’ Islands Official and other non-official Add-ons.
This is the first version released, so even if we did extensive testing, it is highly probable that users will find bugs in a few areas. If this is the case, you should report them on our forum at :
http://www.morrowindcorner.com/phpbb2/
Our Website is located at :
http://www.wizards-islands.com
For Installation, simply browse to your main morrowind folder. After the installation, a program (Bsareg.exe) will ask you to register the Wizards_Islands archive inside the morrowind Ini. It is essential that you click on "Update" and then "OK" after the ini has been updated. Also, make sure you select the Wizards Island - Scourge of the Frost Bringer.ESM. You can do this by starting Morrowind Launcher and selecting Data files.
If an errors occurs and the program does not work on your windows version, you can also update the Morrowind.ini file located in the main morrowind folder by adding this line under [Archives] :
Archive 1=Wizards_Islands.bsa ; (Number must be changed according to the number of registered archives.)
This is an example of how it should look if you installed Morrowind and Tribunal without any mods :
[Archives]
Archive 0=Tribunal.bsa
Archive 1=Wizards_Islands.bsa
__________________________________________________
3. System Requirements
Software : W.I. Requires both Morrowind & Tribunal expansion pack, not Bloodmoon.
Recommended Hardware & Setup :
Pentium 3, 1.6 ghz or better
Video card with at least 64 megs of ram
784 megs of ram (with 512 megs or less, transitions are slow between outdoor and indoor)
For a better image quality we recommend setting anisotropic filtering and Antialiasing.
You can expect a framerate about half the one your system can give in Morrowind in most areas. This is due to our high-resolution textures, almost always 512x512 and above.
__________________________________________________
Presented By Wizards’ Alliance
Hi everyone, I wanted the RPG gamers to know that after 3 years we finaly completed our morrowind expansion pack.
The 611 meg exe archive is located on our website :
http://www.wizards-islands.com
Release Information :
Table of contents
1.Features
2.Release and Installation Information
3.System Requirements
4.Known Gameplay Issues
5.Specific Performance Issues
6.Unique Gameplay Features
7.Team and Credits
__________________________________________________
1. Features
Intense and Epic Multiple-Paths Storyline between 20 and 30 hours.
Over 400 "Cell" Areas.
Over 3 Hours of music.
Tons of characters.
New creatures, items, spells (only for a boss creature atm.) weapons & armors.
And... more cool stuff.
__________________________________________________
2. Release and Installation Information For Version 1.0
Wizards’ Alliance is proud to release Wizards’ Islands, Scourge of the Frost Bringer. Almost 3 years of effort was necessary to achieve our plans, and it turned out very much as we had expected. While all quests are completed and fully implemented, we did leave some room for Wizards’ Islands Official and other non-official Add-ons.
This is the first version released, so even if we did extensive testing, it is highly probable that users will find bugs in a few areas. If this is the case, you should report them on our forum at :
http://www.morrowindcorner.com/phpbb2/
Our Website is located at :
http://www.wizards-islands.com
For Installation, simply browse to your main morrowind folder. After the installation, a program (Bsareg.exe) will ask you to register the Wizards_Islands archive inside the morrowind Ini. It is essential that you click on "Update" and then "OK" after the ini has been updated. Also, make sure you select the Wizards Island - Scourge of the Frost Bringer.ESM. You can do this by starting Morrowind Launcher and selecting Data files.
If an errors occurs and the program does not work on your windows version, you can also update the Morrowind.ini file located in the main morrowind folder by adding this line under [Archives] :
Archive 1=Wizards_Islands.bsa ; (Number must be changed according to the number of registered archives.)
This is an example of how it should look if you installed Morrowind and Tribunal without any mods :
[Archives]
Archive 0=Tribunal.bsa
Archive 1=Wizards_Islands.bsa
__________________________________________________
3. System Requirements
Software : W.I. Requires both Morrowind & Tribunal expansion pack, not Bloodmoon.
Recommended Hardware & Setup :
Pentium 3, 1.6 ghz or better
Video card with at least 64 megs of ram
784 megs of ram (with 512 megs or less, transitions are slow between outdoor and indoor)
For a better image quality we recommend setting anisotropic filtering and Antialiasing.
You can expect a framerate about half the one your system can give in Morrowind in most areas. This is due to our high-resolution textures, almost always 512x512 and above.
__________________________________________________